Restore your Holosun EPS Carry Red Dot Sight

Wiki Article

Occasionally, you may require to reinitialize your Holosun EPS Carry Red Dot sight to its factory settings. This can be helpful if you've been tinkering with the adjustments or are experiencing unexpected performance. Fortunately, resetting your Holosun is a easy process that can be achieved in just a few steps.

• Initially ensuring your red dot sight is activated.
• Identify the small button for reset on the rear of the unit.
• Employ a paperclip to press and hold the reset switch for approximately 7 milliseconds.
• Let go the lever and your Holosun EPS Carry Red Dot sight will power cycle.
• The red dot sight should now be reverted to its factory settings.

Return to Your Holosun EPS Carry Red Dot toward Defaults

In case you've tweaked your Holosun EPS Carry red dot settings and want to start fresh, resetting it back to standard configuration is a breeze. First, find the tiny button on the bottom of your optic. Then, press and hold it for around ten seconds until you see the indicator light change. Your Holosun EPS Carry is now returned to its factory settings, ready for precise aiming.

Bring Your Holosun EPS Carry Back to Life

Is your beloved Holosun EPS Carry experiencing some glitches? Don't despair! A simple factory reset can often resolve the problem and get your red dot sight back to its former glory. Before you begin, remember to disconnect the battery from your Holosun EPS Carry to prevent unexpected activation during the process.

To perform a factory reset on your Holosun EPS Carry, follow these simple steps:

• Simultaneously press and hold the power button for approximately 5 seconds.
• A message will flash, indicating that the reset is being performed.
• Let go of the power button once the reset is complete.

Your Holosun EPS Carry should now be back to its factory settings. You can insert the battery and confirm your sight's functionality. If you encounter any further troubles, don't hesitate to contactHolosun's customer support.

Return Factory Settings on Your Holosun EPS Carry: A Step-by-Step Guide

Resetting your Holosun EPS Carry to factory settings can be a helpful solution if you're experiencing issues with the optic or simply want to start fresh. This process erases all user configurations and returns the sight to its original state. Before proceeding, remember to note down any customizations you have made as they will be lost during this process. Follow these steps carefully to ensure a successful factory reset.

• Initially, Energize your Holosun EPS Carry by pressing the power button.
• After that, press and hold both the mode button and the up/down adjustment button simultaneously.
• As you continue holding these buttons, activate the power button once.
• The display will show a confirmation prompt indicating that the reset process is initiated.
• Enable the process to conclude. This may take a few moments. Once done, your Holosun EPS Carry will automatically power off.

After resetting your Holosun EPS Carry to factory settings, you will need to re-enter any desired customizations, such as brightness levels and reticule style. Refer to the user manual for detailed instructions on configuring your here optic after a reset.

Clear All Settings on Your Holosun EPS Carry

To Factory reset your Holosun EPS Carry sight, you'll need to access the settings menu. This can usually be done by Turning a specific button combination. Consult your Guidebook for the exact button sequence for your model. Once in the settings menu, look for an option that says "Factory Default". Select this option and confirm the reset. Your sight will then power off and restart with all settings Reinitialized to their default values.

Reset your Holosun EPS Carry through a Factory Standard Settings

If your Holosun EPS Carry is acting up, a factory reset might be the solution. This will return your sight to its factory settings, clearing any altered configurations you've made. To execute this reset, observe these straightforward steps:

• Initially, identify the reset button on your EPS Carry.
• Next, engage a fine object, like a paperclip, to depress the reset lever.
• During maintain the reset lever activated, power on your EPS Carry.
• You'll flash a message indicating that the reset is finished.

When the reset is finished, your EPS Carry will be set to its factory settings.

Report this wiki page